Computer support made of aluminum for underwater use – Carbonarm Computer's Support ACC/BRA/DIVE
Computer support made of aluminum for underwater use – Carbonarm Computer's Support ACC/BRA/DIVE
Computer support made of aluminum for underwater use – Carbonarm Computer's Support ACC/BRA/DIVE
Computer support made of aluminum for underwater use – Carbonarm Computer's Support ACC/BRA/DIVE
Computer support made of aluminum for underwater use – Carbonarm Computer's Support ACC/BRA/DIVE
Computer support made of aluminum for underwater use – Carbonarm Computer's Support ACC/BRA/DIVE
Computer support made of aluminum for underwater use – Carbonarm Computer's Support ACC/BRA/DIVE
Computer support made of aluminum for underwater use – Carbonarm Computer's Support ACC/BRA/DIVE

Computer's Support

Plastic Free
ACC/BRA/DIVE
€64.75
Support for Dive Computers with a Storage Compartment, consisting of a tube in anodized aluminum and a fringe which is fixed bya ball (SF/M6). With a removable cap in Delrin, with O-ring that allows the use of the internal volume of the tube, such as storage watertight. For the configuration shown in the figure, it is recommended to use a Open Triple Clamp (CP/3A).

 
Carbonarm uses 100% "Made in Italy" materials, from anticorodal aluminum to stainless steel screws. All parts are designed and produced in Italy, with particular attention to finest details.
Maximum Guaranteed Depth
150 m
Length
10 cm
Diameter
70 mm
Sphere diameter
25 mm
Weight
180 g
Immersion weight
50 g

Customers who bought this product also bought:

Starting Ball – Carbonarm Underwater Strobe Arm Systems Starting Ball with Quick Release SF/PT/SF Starting Ball – Carbonarm Underwater Strobe Arm Systems Starting Ball with Quick Release SF/PT/SF 2
Quick Release

Starting Ball with Quick Release

SF/PT/SF
€36.89
There are not enough products in stock
Starting Ball with Quick Release. Buckle not included.Bracket Buckle for Scooter (ACC / SUP / SCO) allows you to connect various products (GoPro Case, Illuminators, etc ...) to a scuba scooter, and be able to quickly remove and reposition them in the water. It is also possible to place the Starting Ball on our housings.
Triple aluminum tripod clip for underwater use Triple Clamp for Tripod CLV/CP3 Triple aluminum tripod clip for underwater use Triple Clamp for Tripod CLV/CP3 2
Single Elements for Tripods

Triple Clamp for Tripod

CLV/CP3
€43.44
There are not enough products in stock
Triple Clamp for tripod, fundamental for joining elements with balls 25 mm in diameter.
Carbonarm terminal ball - Aluminum 25 mm 1 inch - M6 Ball M6 SF/M6 Carbonarm terminal ball - Aluminum 25 mm 1 inch - M6 Ball M6 SF/M6 2
Balls and Terminals

Ball M6

SF/M6
€16.39
There are not enough products in stock
M6 ball with a diameter of 2,5 cm, complete with a stainless steel screw. Anticorodal aluminum, anodized with 40 microns (military standard) to ensure maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, strobes, lights, and so on. An o-ring placed at the center of the ball is acts like a...
Underwater Tripod Head - Carbonarm Tripod Head 3 Arms CLV/TST Underwater Tripod Head - Carbonarm Tripod Head 3 Arms CLV/TST 2
Single Elements for Tripods

Tripod Head 3 Arms

CLV/TST
€97.54
There are not enough products in stock
The tripod head is composed of 1 special triple clamp open on one side with upper ball CLV/CP3, 1 whitworth ball SF/WT and 1 grip with clamp for tripod CVL/MNG. This tripod can be easily adapted to various housings simply by fixing the housing to the terminal ball.
Carbonarm – Floating Rings Kit - 500gr Floating Rings Kit 500 g FL/RING4
Floating Items

Floating Rings Kit 500 g

FL/RING4
€40.16
There are not enough products in stock
This kit consists of 4 floating ringsEach ring is made of closed cell high density polyurethane foam, uncompressible until -250 mt and provides a buoyancy of about 125 g . It has a central hole Ø25 suitable for most arms available on the market.
M8 ball terminal made for underwater use - Carbonarm Ball M8 SF/M8 M8 ball terminal made for underwater use - Carbonarm Ball M8 SF/M8 2
Balls and Terminals

Ball M8

SF/M8
€16.39
There are not enough products in stock
M8 ball, with M8 thread in the lower part and hexagonal insert in the upper part that allows to tighten it with a simple allen key. It is made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, strobes,...
Open Lock Clip Open – Carbonarm Open Clamp Standard CP/2A Open Lock Clip Open – Carbonarm Open Clamp Standard CP/2A 2
Clamp

Open Clamp Standard

CP/2A
€26.23
There are not enough products in stock
Open Standard Clamp. The opening part of the clamp allows to direct the arms at different angles.
Computer support L for underwater use – Carbonarm Computer's Support L ACC/BRA/DIVE/L Computer support L for underwater use – Carbonarm Computer's Support L ACC/BRA/DIVE/L 2
Balls and Terminals

Computer's Support L

ACC/BRA/DIVE/L
€64.75
There are not enough products in stock
Support for Dive Computers with a Storage Compartment, consisting of a tube in anodized aluminum and a fringe which is fixed a ball (SF/M6). With a removable Cap in Delrin, with O-ring that allows the use of the internal volume of the tube, such as storage watertight. For the configuration shown in the figure, it is racommended to use a Open Triple Clamp...
Threaded Block balls made of aluminum - Carbonarm Threaded block for balls m6 ACC/SF/4 Threaded Block balls made of aluminum - Carbonarm Threaded block for balls m6 ACC/SF/4 2
Balls and Terminals

Threaded block for balls m6

ACC/SF/4
€13.11
There are not enough products in stock
Anticorodal Aluminum Block, with 4 M6 Threads to insert up to 4 SF / M6 Balls, to a Handle already equipped with IM / SF end ball. Included in the price is the stainless steel screw to be replaced in the Ball of the handle.
Whitworth terminal ball – Carbonarm Ball Whitworth SF/WT Whitworth terminal ball – Carbonarm Ball Whitworth SF/WT 2
Balls and Terminals

Ball Whitworth

SF/WT
€16.39
There are not enough products in stock
Ball with 2,5 cm diameter with Whitworth thread made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This ball is designed to be mounted on all accessories, both photo and video (for example Go Pro, compact digital cameras, DSLR…) that are arranged...
Compatte, solide semplicemente perfette
Luigi Casati

Luigi Casati

2021-03-12

Product added to wishlist
Product added to compare.



From today and for Spring 2021

Free shipping


for orders of at least € 250

Standard shipping via courier in Europe.

By using this website you consent to the use of cookies and third-party cookies. It is possible to view the Privacy Policy page regarding the management methods of the same.