Available
Accessories
Available
€26.23
Open Standard Clamp. The opening part of the clamp allows to direct the arms at different angles.
Available
€31.97
Standard Clamp, Long Version.This longer version is particularly suitable to be coupled to the floating arms because it allows the closure to 180 ° but can be safely used even with standard arms.
Available
€34.43
Triple Clamp for balls 25 mm (1 inch). The triple clamp allows to use different accessories like pilot light, microcameras, and so on.
Available
€36.07
Triple Clamp, Open Version. The triple clamp allows to use different accessories like pilot light, microcameras, and so on. The clamp opening allows to direct the arms at different angles.
Available
€37.70
Quadruple Clamp. The quadruple clamp allows to use different accessories, such as pilot light, Go Pro, strobes, arms etc.
Available
€40.98
Quadruple Clamp, open version. The open quadruple clamp allows to use different accessories, such as pilot light, GoPro, strobes, arms etc. The clamp opening allows to direct the arms at different angles.
Available
€16.39
M6 ball with a diameter of 2,5 cm, complete with a stainless steel screw. Anticorodal aluminum, anodized with 40 microns (military standard) to ensure maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, strobes, lights, and so on. An o-ring placed at the center of the ball is acts like a...
Available
€16.39
M8 ball, with M8 thread in the lower part and hexagonal insert in the upper part that allows to tighten it with a simple allen key. It is made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, strobes,...
Available
€16.39
M8 Sphere complete thread M3 / 8 at the bottom and insert hex at the top that allows you to hold it with a simple allen key. E'in anticorodal aluminum, anodized and treated military 40 micron for maximum resistance against wear and salt in time.
Available
€16.39
Universal ball with a 8mm diameter hole that allows to easily attach different underwater strobes (sea&sea and similar) to to strobe arms and other devices. It is made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. An o-ring placed at the center of...
Available
€16.39
Ball with 2,5 cm diameter with Whitworth thread made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This ball is designed to be mounted on all accessories, both photo and video (for example Go Pro, compact digital cameras, DSLR…) that are arranged...
Available
€16.39
M6 ball with blind thread inside, height: 6cm, made out of anticorodal aluminum and anodized with 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different arms, strobes, lights, etc.... An o-ring at the center of the ball provides optimal flexibility. The length of 6 cm allows, in...
Available
€16.39
Whitworth (Kodak) ball with blind thread inside, made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, flashes, lights, and so on. An o-ring at the center of the ball is acts like a clutch: the ball...
Available
€16.39
M6 ball with inside blind thread, made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, flash, lights, and so on. An o-ring at the center of the ball acts like a clutch: the ball tightened by the clamp...
Available
€18.03
Bayonet base with inside threaded hole M6. It is made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This accessory can be easily adapted to different supports for various housing models.
Available
€31.97
Starting ball composed of a bayonet base and a M6 ball made of anticorodal aluminum and anodized with 40 microns (military standard) 40 microns are used in the production to ensure maximum durability and excellent resistance to wear and to sea salt. This accessory can be easily adapted to different supports for various housing models and allows to easily...
Available
€9.84
Starting bayonet with 2 countersunk holes M5. Made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. M5 Screws are included in the price.
Available
€23.77
Ball with GoPro adapter tripod. It is made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. This special ball allows to mount the GoProcamera to all Carbonarm systems such as polecams, grips, arms, clamps, etc. ... An o-ring at the center of the ball is placed to provide...
Available
€23.77
SF/FL ball, composed of a ball SF/MC with a diameter 2,5 cm and a flat contact flash adapter threaded M6, both made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. This ball is very useful to mount many accessories directly on housing's hot shoe.
Available
€31.97
Universal accessory, adaptable to many strobes and pilot lights, complete with 4 o-rings of two different measures to allow to mount lights of different sizes.
Available
€64.75
Support for Dive Computers with a Storage Compartment, consisting of a tube in anodized aluminum and a fringe which is fixed bya ball (SF/M6). With a removable cap in Delrin, with O-ring that allows the use of the internal volume of the tube, such as storage watertight. For the configuration shown in the figure, it is recommended to use a Open Triple...
Available
€64.75
Support for Dive Computers with a Storage Compartment, consisting of a tube in anodized aluminum and a fringe which is fixed a ball (SF/M6). With a removable Cap in Delrin, with O-ring that allows the use of the internal volume of the tube, such as storage watertight. For the configuration shown in the figure, it is racommended to use a Open Triple Clamp...
Available
€64.75
This accessory has the function of "rear-view mirror," applied at the junction of the arms through a triple clamp CP/3 it allows to see what happens behind you.The front part comes with a 67 mm thread that allows to place additional lenses. The side hasM8 threaded holes, Kodak and M6 that allows to place balls SF/M8, SF/WT and SF/M6.